Sun Microsystems Crypto Accelerator 4000 Guide De L'utilisateur Et D'installation page 225

3. Si vous choisissez de ne pas configurer un VirtualHost, les directives
SSLEngine, SSLCertificateFile et SSLCertificateKeyFile doivent
être placées dans le fichier httpd.conf, juste au-dessus de la directive
SSLPassPhraseDialog.
You may need a virtual host directive similar to
what is shown below:
<VirtualHost _default_:443>
SSLEngine on
SSLCertificateFile /etc/apache/keys/base-name-cert.pem
SSLCertificateKeyFile /etc/apache/keys/base-name-key.pem
</VirtualHost>
You must add the following line after all of your VirtualHost
definitions:
SSLPassPhraseDialog exec:/opt/SUNWconn/cryptov2/bin/apgetpass
Other SSL-related directives and their explanations
can be found in the Sun Crypto Accelerator documentation.
Other Apache-related directives may need to be configured
in order to start your Apache Web Server. Please refer
to your Apache documentation.
<Press ENTER to continue>
Si vous avez répondu non à la question de l'étape 7, section « Configuration du
serveur Web Apache 2.x », page 198, vous obtiendrez des informations
supplémentaires sur la création ultérieure de clés matérielles.
Since you did not create keys, you will need to
make sure that you have a key file and a certificate
file in place before enabling SSL for Apache.
You can create a new key file and certificate request
by selecting the "Generate a keypair and request a
certificate for Apache" option after choosing
"Work with Sun ONE and Apache keys" from the
apsslcfg main menu.
4. Lorsque vous avez terminé, tapez 0 pour quitter l'utilitaire apsslcfg.
Chapitre 6 Installation et configuration du logiciel du serveur Web Apache 195