About the serial number
The serial number provided for the Reader is required for
the customer registration. The number is on the label on the
rear of the Reader. Do not remove the label.
Removing/attaching the soft cover
Removing the soft cover
Pull the tab of the soft cover towards A.
Remove the Reader in the direction of B.
Attaching the soft cover
Insert the tab C of the soft cover in the hole D of the
Reader.
Pull the tab of the soft cover towards A.
Insert the Reader in the direction of E to attach it to the
soft cover.
Check that the tabs of the soft cover are completely
inserted in the holes of the Reader.
Note
Note that the tab of the soft cover may become deformed, if you
pull the tab too strongly.
12
Continued
US