Yamaha MCR-E410 Mode D'emploi page 34

Additional CT (clock time) settings
You can use CT information received from the Radio Data
System stations to adjust the built-in clock of the receiver.
STANDBY/ON STANDBY/ON
1 1 2 2 3 3
5 6 7
5 6 7
9 9 0 0
FREQ/TEXT FREQ/TEXT
PROG REPEAT
PROG REPEAT
PTY SEEK PTY SEEK
MODE MODE
RANDOM RANDOM
TIME/INFO TIME/INFO
FOLDER/PRESET FOLDER/PRESET
FILE FILE
ENTER ENTER
/A-E /A-E
INPUT VOLUME
INPUT VOLUME
DISPLAY DISPLAY
SLEEP SLEEP
CD CD TUNER TUNER BAND BAND
TAPE/MD TAPE/MD AUX/TV AUX/TV DOCK DOCK
1
While tuning into a Radio Data System
station, press DISPLAY repeatedly so that the
clock appears in the front panel display of
the receiver.
2
Press FREQ/TEXT once.
"CT→Clock" appears in the front panel display.
4 4
8
8
DIMMER
DIMMER
FREQ/TEXT
START START
PTY SEEK START
PTY SEEK MODE
MENU MENU
FILE FILE
/A-E /A-E
DISPLAY
TUNER
Radio Data System Tuning (U.K. and Europe Models Only)
3
Press PTY SEEK MODE repeatedly to select
"CT→Clock" or "Local CT", and then press
PTY SEEK START to switch the setting
between "ON" and "OFF".
CT→Clock
Set this to "ON" if you want to apply CT information
received from the Radio Data System stations to the
built-in clock of the receiver. (The default setting is
"ON".)
Local CT
Set this to "ON" if you want to apply the daylight
saving time or summer time to CT information
received from the Radio Data System stations. (The
default setting is "ON".)
4
Press FREQ/TEXT to confirm the settings.
31
En