Télécharger Imprimer la page

Jensen Dynamique Mode D'emploi Et De Montage page 7

Masquer les pouces Voir aussi pour Dynamique:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Button locking/child safety mechanism
If the logo and clock are visible in the display,
you can do the following: press the joystick
upwards, to the right, downwards, to the left
and then upwards to activate the button locking
mechanism. Repeat this procedure to deac-
tivate the button locking mechanism.
Clock
Move the joystick to the right or to the left to
change the hour.
Press the joystick to confirm the desired time.
Alarm: On/Off.
Alarm function
Select P1, P2, P3 or music. Refer to 'Program-
me favourite settings'. Only those elements
and levels which are in the selected favourite
programme will be activated.
If the alarm function is active.
If you press the joystick, everything will be swit-
ched off and you will be woken again 5 minutes
later. If you move the joystick to the side you
will see a screen showing the clock and status
and you will able to choose 'STOP' to switch
the alarm off or 'SNOOZE' to be woken again 5
minutes later.
Synchronising beds
'1' controls bed no. '1' and '2' controls bed
no. 2.
'1+2' should you wish 2 beds to be coupled
to one remote control. Press the joystick to
confirm.
Do not forget that only the bed movements will
be synchronised. Press 'New' if you want to
synchronise remote control no. 2.
Light
You can set the light intensity by moving the
joystick to the right or to the left. Press the
joystick to confirm.
Timer
You can set the light to go off at a certain time.
Select the time. Press the joystick to confirm.
This function is only available if you have
purchased a Dynamique lamp.
Massage
Choose between massage at the head and foot
end and rolling massage.
Head end massage
Move the joystick to the right or to the left to
select the
desired force.
Press the joystick to confirm.
Foot end massage
Move the joystick to the right or to the left to
select the
desired force.
Press the joystick to confirm.
Rolling massage
Move the joystick to the right or to the left to
select the
desired force/frequency.
Press the joystick to confirm.
Timer
You can have the massage stop at a certain
time. Press the joystick to confirm.
Ventronic
®
Ventronic
is a silent ventilator, fitted to the
®
base of the bed. The ventilator removes
excess heat and moisture from the matt-
ress and creates a cooler sleeping climate,
even on hot summer nights. Move the
joystick to the right or to the left to select
the desired force.
Press the joystick to confirm.
NOTE: The ventilation works best and ex-
tracts air out of the entire bed if you sleep
under a blanket or duvet.
Timer
You can have the ventilation stop at a
certain time.
Press the joystick to confirm.
Programming favourite settings
(P1, P2 and P3)
You can pre-programme three different
positions / massage functions / lighting
/ ventilation settings which you can then
activate at will.
Select the function(s) you want to save, for
example the light.
Select light in the menu. Set the desired
light intensity.
Press the joystick to confirm your selection.
Then go to P1.
Press the joystick twice in rapid succes-
sion.
Select OK in the 'Save Current settings to
P1' menu screen.
You can select various options in the same
programme.
Press the chosen programme again to
finish.
NOTE: To change an existing programmes,
start the programme, go to the desired
functions and adapt them to your wishes.
You can then save the programme in the
same position, P1-3.
Setting the position of the bed
Turn the remote control upside down (so
that the joystick points upwards).
The display will switch to energy saver
mode.
Move the joystick upwards to move the
head end upwards.
Move the joystick downwards to move the
head end downwards.
Move the joystick to the right to move the
foot end upwards.
Move the joystick to the left to move the
foot end downwards.
Save your favourite position by pressing
the joystick (for 2 seconds) until you see 2
flashing signals.
From now on the bed will move to your
favourite position when you first press the
joystick and it will move back to horizontal
when you press it a second time.
UK
D
F
NL
ESP
N
S
SF
DK
PL
7

Publicité

loading