Virax Mini VISIOVAL Manuel D'utilisation page 33

Step 2
Insert the SD card and turn the device on. Check that the battery level is at least 50%.
Step 3
Do not press the on/off button as long as the hour glass is
displayed on the screen!
Step 4
Update successful, OK to turn the device off and remove the SD card.
9. Cleaning instructions
1- Use alcohol wipes or mild detergent and water to remove any dirt or grease from the
product.
2- The use of a soft lens cleaning cloth is recommended for cleaning the LCD display.
3- A cotton cloth is recommended for cleaning the imager head.
4- Allow the device to dry before use.
The firmware is being updated (45 seconds).
EN
33