Basic Functions; Making A Call - SCS Sentinel EVOLUTIF Manuel D'utilisation

EN

Basic Functions

All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the

Making a Call

1. Pick up the handset and press the
Result: The icon appears on the LCD.
2. Dial a telephone number.
3. To end the call, either press the
or replace the handset on the base.
Note
:
To make a call to the last number you dialed,
Redial
use the
16.
47
EN ::: 47
key.
key.
feature. For details, see page
You can enter the desired phone number in
standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Enter a telephone number (
Check it. You can also use the
insert a pause.
key
Note
:
If you make a mistake while entering a
number, press the
the last digit.
2. When the number appears correctly, press
the key.
up to 24 digits
key to
Erase
soft key to clear
).