Installation Instructions - Fisher & Paykel ActiveSmart RF135B Guide D'utilisation

Please follow the installation steps below to ensure your appliance operates correctly.
1. Power
The appliance must be installed so the plug is accessible.
■ ■
To ensure that the appliance is not accidentally switched off, connect your refrigerator to its
■ ■
own power point. Do not plug in any other appliance at this power point or use extension cords
and double adaptors, as the combined weight of both power cords can pull the double adaptor
from a wall outlet socket.
For power requirements, refer to the information on the serial plate located at the front bottom
■ ■
right-hand side of the refrigerator when the door is open.
It is essential that the appliance is properly grounded (earthed).
■ ■
2. Location
Your refrigerator should not be located in direct sunlight or next to any heat generating
■ ■
appliance such as a cooktop, oven or dishwasher.
3. Ice & Water (Ice & Water models only)
Your Ice & Water refrigerator must be installed by an authorized plumber or Fisher & Paykel
■ ■
Authorized Service Agent as incorrect plumbing can lead to water leaks.
Fisher & Paykel Appliances does not accept responsibility for damage (including water damage)
■ ■
caused by faulty installation or plumbing.

Installation instructions

US
5
CA