Fisher & Paykel ActiveSmart RF135B Guide D'utilisation page 15

Important!
All connections must be checked for leaks.
■ ■
Ensure white ¼" (6 mm) tubing is routed away from sharp objects, sharp corners (beware of
■ ■
kinking tube as this will stop water flow), clear of the refrigerator unit compartment and not in a
location where it can be squashed.
Ensure all push-fit connections are firmly pushed into place. The tube should push in ¾" (20 mm)
■ ■
before reaching the stop.
If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to
■ ■
avoid leaks.
To remove tube from connection points, turn off the isolating faucet, push in the collet and
■ ■
gently pull tubing at the same time, as shown in Diagram 10.
Diagram 11
System tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction
of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane, Mercury, P-Dichlorobenzene,
Toxaphene & Turbidity; against Standard NSF/ANSI 42 for the reduction of Chlorine Taste and
Odor and Nominal Particulate Class I to a capacity of 750 gallons (2,838 liters).
Installation instructions
Diagram 10
Fig.9 Connection to water supply
US
13
CA