Commissioning; Routine Maintenance - Corghi Erco X5000 CT LT PT2 FAST Manuel D'utilisation

WARNING
The lift must be commissioned by specially trained staff capable of ensuring that the
lift and all its mechanical and electrical safety systems are operating correctly.
The instructions to be followed are provided at the back of this manual, in a section for
the use of authorised commissioning staff only.
Work must absolutely never be done by staff who do not belong to the Manufacturer
After-Sales Service.
WARNING
Any damage deriving from failure to follow the instructions given above cannot be
charged to the manufacturer and may cause the warranty to become null and void.

ROUTINE MAINTENANCE

WARNING
The "Spare parts" handbook does not authorise the user to carry out work on the
machine with the exception of those operations explicitly described in the operator's
manual, but enables the user to provide the technical assistance service with precise
information, in order to reduce delay.
WARNING
The manufacturer declines all liability for problems and/or damages derived from the
use of non-original spare parts or accessories.
WARNING
It is forbidden to change any operating pressure calibration value for the maximum-
pressure valves or the pressure limiter.
The manufacturer declines all liability for damage caused by tampering with these
valves.
WARNING
Before proceeding with any adjustment or maintenance work, disconnect the machine
from pneumatic and electric power supply, and check that all the moving parts are
locked in place.
Operator's manual ERCO X5000 CT LT PT2 FAST

COMMISSIONING

UK
69