Corghi Erco X5000 CT LT PT2 FAST Manuel D'utilisation page 68

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

0
MASTER SWITCH
To switch on the control unit simply turn the master switch clockwise (from 0 to 1).
The switch may be padlocked in position "0" to prevent unauthorised use of the lift.
1
SAFE PARKING BUTTON/MAIN LIFT QUICK POSITIONING
This button has 2 functions
a - if the button is directly pressed, the lift starts the descent without raising the mechani-
cal safety devices claws to make the lift stand on the mechanical safety devices;
b - if the button F is pressed and held down and then button 1 is pressed, the lift will
descend immediately, without raising again.
2
MAIN LIFT UP BUTTON
By pressing this button, the lift starts its raising stroke.
3
MAIN LIFT DOWN BUTTON
By pressing this button, the lift raises for about 1.5 seconds to disengage the mechanical
safety device and then starts the descent stroke.
4
LIGHT BUTTON
By pressing this button, the lighting system lights turn on / off (OPTION).
5
BUTTON F
Allows the button second function usage, where available.
6
BUTTON -
Not used.
7
BUTTON +
Not used.
8
SAFE PARKING BUTTON/FREE-WHEEL LIFT TABLE QUICK POSITIONING
This button has 2 functions
a - if the button is directly pressed, the lift starts the descent without raising the mechani-
cal safety devices claws to make the lift stand on the mechanical safety devices;
b - if the button F is pressed and held down and then button 8 is pressed, the lift will
descend immediately, without raising again.
9
FREE-WHEEL LIFT TABLE UP BUTTON
By pressing this button, the free-wheel lift table starts its raising stroke.
10 FREE-WHEEL LIFT TABLE QUICK DOWN BUTTON (LT)
By pressing this button, the free-wheel lift table raises for about 1.5 seconds to disengage
the mechanical safety device and then starts the descent stroke.
11 POWER ON LED INDICATOR (ORANGE)
The light comes on to indicate that the control unit is receiving power.
12 LED INDICATOR OK (GREEN)
Not used.
13 LED INDICATOR ALARM1 (RED)
The light illuminates to indicate a fault or an electronic malfunction in the control sys-
tem.
Read the Chapter: PROBLEM-SOLVING AND TROUBLESHOOTING
14 LED INDICATOR ALARM2 (RED)
The light illuminates to indicate a fault or an electronic malfunction in the control sys-
tem.
Read the Chapter: PROBLEM-SOLVING AND TROUBLESHOOTING
15 LCD DISPLAY
68
Operator's manual ERCO X5000 CT LT PT2 FAST

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Erco x5000 ct lt pt2Erco x5000 ct lt fastErco x5000 ct lt

Table des Matières