essentiel b Solo Notice D'utilisation page 20

Symbol Interface Status
Steady
Power
Flashing
indicator light
(1)
Off
Steady
Adapter
connection
Off
indicator light
(2)
Steady
Ethernet
connection
Flashing
indicator light
(3)
Off
Green light
2.4G
WiFi
Flashing green light
connection
5G
Red light
indicator light
(4 and 5)
Flashing red light
When the device is plugged into the power supply, insert the end of
a paper clip into the hole next to the letters "RST", which is located
underneath the WiFi powerline adapter, until you feel a slight click. Hold
6 Reset button for 10 seconds. The adapter restarts and returns to its factory default
settings (user name: admin, password: admin).
All new powerline adapters are named HomePlugAV. If you experience
problems when pairing a new powerline adapter, reset each adapter.
To secure a powerline network: press the PAIR button for one second
•
to pair the adapters and establish a secure network connection. If
you are pairing multiple adapters, you have two minutes to pair them
7 Pair button together. Then wait one minute for the pairing between the devices
to finish.
To reset a powerline network: press the PAIR button for 10 seconds to
•
exit the network connection and reset the adapters.
These three ports allow you to connect the WiFi powerline adapter
Ethernet ports
8 to your computer or any device with a network connection using an
(RJ-45)
Ethernet (RJ-45) cable.
38
Description
On and ready
Pairing
Disconnected
Successful pairing
The device is disconnected, no pairing with
another WiFi or plug powerline adapter.
Network connection established No data
transfer
Data transfer
No network connection
Active and secure WiFi
Data exchange via secure WiFi network
WiFi active but not secure
Data exchange via non-secure WiFi network
DUO WIFI POWERLINE ADAPTER
1
2
4
6 5
3
39