Introduction - Metz mecablitz 26 AF-2 Mode D'emploi

Introduction

Thank you for choosing a Metz mecatech product.
We are delighted to welcome you as a customer.
You will of course be impatient to start using the flash
unit.
However, it is worthwhile reading the operating instruc-
tions and learning how to use the unit correctly.
The 26AF-2 flash unit comes in different versions and is
accordingly suitable for:
• Digital Canon cameras with E-TTL and E-TTL-II - flash
metering.
• Digital Nikon cameras with i-TTL flash metering.
• Olympus/Panasonic - Digital cameras with TTL flash
control and flash socket system, as well as the com-
patible digital cameras from Leica.
• Digital Pentax cameras with P TTL flash metering .
• Digital Sony reflex cameras with TTL preflash
and ADI metering.
• Digital FUJIFILM system cameras with TTL flash control.
This flash unit is not suited for other brands of cameras.
Take a look at the diagrams at the end of the manual.
Attention - Extremely important safety information!
Proper Use
This flash unit is intended solely for taking pictures of
motifs in the photographic field. It may be operated
only with the accessories described in this instruction
manual or the accessories approved by Metz.
The flash unit may not be used for any purpose other
than that described above.
k
83