Using The Bluetooth Mobile Phone - JVC KW-AVX830 Manuel D'instructions

Using the Bluetooth mobile phone

Status of the device
• Signal strength/Battery remainder (only when the
information comes from the device).
* The number indicates the list position when selecting the device on the "BT Phone" source screen.
If the screen is turned off, it will turn on again when a call/SMS comes in.
Displays <Dial Menu> screen.
[ ]
5 ∞
[ ] Selects the registered device. ("NEW
DEVICE" appears when a new device can
be registered.)
[SOURCE] Displays <Source Menu> screen.
Receiving a call
When a call comes in...
The source is changed to " BT Phone" automatically.
Name and phone
number (if acquired)
• Pressing any button on the monitor panel (except
and VOL +/–) also receives a call.
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
( 51)
• You can adjust the microphone volume. (
SOURCE
Bluetooth
Connected Device Name
FLAT
15:45
51)
Bluetooth icon
• (Blue): Bluetooth mobile phone is connected.*
• (White): Not connected.
• Displays <AV Menu> screen.
[ ]
• Activates <Voice Dialing> function.
(Hold)
− To cancel <Voice Dialing>, hold
any button on the monitor panel
(except
Ending the call
Talking...
• Holding any button on the monitor panel (except
and VOL +/–) also ends a call.
Stopping ringing (canceling
the outgoing call)
(Any button except
and VOL +/–)
47
KW-AVX730
Connected device name
and VOL +/–).
(Hold)
(Hold)