Connecting Bluetooth Devices - JVC KW-AVX830 Manuel D'instructions

Connecting Bluetooth devices

Inserting the Bluetooth
adapter
1
Open the monitor panel.
2
• Insert the Bluetooth adapter firmly with the
JVC logo facing up.
• This port is designed for the use with KS-
UBT1 only. Other Bluetooth adapters or USB
devices cannot be used.
3
Close the monitor panel.
The monitor panel closes automatically if no
operation is done for about a minute.
• Keep the Bluetooth adapter inserted when using the
Bluetooth function.
Connecting a new Bluetooth
device for the first time
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your
Bluetooth device you want to connect.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to 5 devices can
be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
( 6)
"JVC"
Bluetooth adapter
(KS-UBT1)
( 6)
1
2
Bluetooth
Dial Menu
Device Menu
Settings
Device Menu
Phone Connect
Audio Connect
Delete Pairing
New Pairing
3
Change the PIN code
• You can enter any number you like (1-digit to
16-digit number).
• If you skip changing PIN code, press [Enter].
PIN code (initial: 0000)
PIN Code
Back
[BS]: Erases the character before the cursor.
[Del]: Erases the character on the cursor.
Operate the Bluetooth device to connect while
"Open..." is displayed on the screen.
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Now connection is established and you can use the
device through the unit.
• The device remains registered even after you
disconnect the device. Use <Phone Connect>/
<Audio Connect> (or activate <Auto
Connect>,
from next time.
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
36
KW-AVX830
Bluetooth
Enter
Enter
Enter
Enter
Enter
Enter
Enter
.
*
Enter Exit
43) to connect the same device