Numark NS7II Guide D'utilisation page 4

2. Install the Drivers and Software
IMPORTANT: Install the drivers before installing the software.
Drivers: Download and install the latest drivers from numark.com/ns7ii. (You will be asked to
connect the NS7II to your computer during installation.)
Software: Download and install the latest version of Serato DJ from serato.com.
3. Connect and Start DJing!
Follow this sequence of steps whenever you use NS7II:
1. Make sure all devices are off and all faders and gain knobs are set to "zero."
2. Connect input sources (microphones, turntables, CD players, etc.) to the NS7II.
3. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to the NS7II.
4. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) NS7II, (3) output devices.
• When ending a session, turn off (1) output devices, (2) NS7II, (3) input sources.
5. Connect the NS7II to your computer with the USB cable (included) and to your headphones.
6. Open Serato DJ and go! For more information on how to use Serato DJ with NS7II, visit
serato.com/dj/support and select Numark NS7II.
Connection Diagram (example):
Headphones
(to front panel)
00.0%
Turntable
Computer
Tablet, MP3 player, etc.
Any items shown here but not mentioned in the Box Contents are sold separately.
4
Powered Loudspeakers
Microphone
(to front panel)
Power