Safety Precautions - OHAUS DEFENDER 3000 Serie Manuel D'instructions

DEFENDER 3000 Series Floor Scale
INTRODUCTION
This manual contains installation, operation and maintenance instructions for the DEFENDER 3000 Series Floor
Scale.

SAFETY PRECAUTIONS

Please follow these safety precautions:
•
Never operate in hazardous areas.
•
The foundation at the installation site must be capable of safely supporting the weight of the
floor scale plus the weight of the maximum load.
•
Ensure that vibrations due to machines near the installation site are kept to a minimum. This
applies also when the floor scale is integrated into conveying systems.
INSTALLATION
CAUTION: THE FLOOR SCALE IS VERY HEAVY.
ALWAYS USE AN APPROPRIATE HOIST TO LIFT IT FROM THE PACKAGING
OR TO MOVE IT INTO THE REQUIRED POSITION.
Unpacking
1. Remove the outer packaging
materials from the top and sides
of the floor scale.
2. Install the two included eye bolts
into holes in top of platform.
(See Figure 1.)
3. Lift the floor scale from the
packaging material, see caution
notice.
EYE BOLT
LOAD CELL FEET
SHIPPING FEET (IF INSTALLED)
Figure 1. Hoisting Method.
EN-3