Replacing The Lamp; Noises; Closing The Door - AEG SCB61816NS Notice D'utilisation

14 www.aeg.com
Problem
All the temperature setting
LEDs flash at the same time.
If the advice does not lead
to the desired result, contact
the nearest Authorised
Service Centre.

8.2 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.

9. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).
OK
SSSRRR!
Possible cause
An error has occurred in
measuring the tempera-
ture.

8.3 Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective
SSSRRR!
Solution
Contact the nearest Author-
ised Service Centre. The cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible.
assembly instructions.
door gaskets. Contact the Authorised
Service Centre.
HISSS!
BRRR
!