Reset To Factory Default Settings - Sena SRL2 Mode D'emploi

SRL2
Tap the (+) Button or the (-) Button
Phone Pairing
Second Mobile Phone Pairing
GPS Pairing
Phone Selective Pairing
Media Selective Pairing
Delete All Pairings
Remote Control Pairing
Universal Intercom Pairing
Factory Reset
Exit Configuration
50
Tap the Center Button
None
None
None
None
None
Execute
Execute
Execute
Execute
Execute

23 RESET TO FACTORY DEFAULT SETTINGS

1. To restore the SRL2 to factory default settings, press the Center
Button for 12 seconds until you hear high-toned double beeps.
You will hear a voice prompt saying "Configuration menu".
2. Tap the (-) Button twice and you will hear a voice prompt saying
"Factory reset".
3. Within 5 seconds, tap the Center Button to confirm reset. The
headset will be restored to factory setting and switched off
automatically. You will hear a voice prompt saying "Headset
reset, good-bye".