Sena SRL2 Mode D'emploi page 261

5.1 A2DP Stereo Music Only
1. Turn on the headset and press the Center Button for 12 seconds
until you hear high-toned double beeps. You will hear a voice
prompt saying "Configuration menu".
2. Within 2 seconds, tap the (+) Button 5 times, then the LED turns
to red flashing and the beeps turn to double mid-toned beeps.
You will hear a voice prompt saying "Media selective pairing".
3. Search for Bluetooth devices on your smartphone. Select the
Sena SRL2 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
5.2 HFP for Phone Call Only
1. Turn on the headset and press the Center Button for 12 seconds
until you hear high-toned double beeps. You will hear a voice
prompt saying "Configuration menu".
2. Within 2 seconds, tap the (+) Button 4 times, then the LED turns
to blue flashing and the beeps turn to multiple mid-toned beeps.
You will hear a voice prompt saying "Phone selective pairing".
3. Search for Bluetooth devices on your smartphone. Select the
Sena SRL2 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
6 MOBILE PHONE CALL MAKING AND
ANSWERING
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Center Button to
answer the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if Voice Activated Phone Answering (VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, press the Center Button for 2 seconds, or wait for
the called person to end the call.
4. To reject a call, press the Center Button for 2 seconds until you
hear a voice prompt saying "Call Rejected".
5. There are several ways to make a phone call:
• Enter numbers on your mobile phone's keypad and make a call.
Then the call is automatically transferred to the headset.
• In stand-by mode, press the Center Button for 3 seconds, to
activate the voice dialer of your mobile phone. For this, the voice
dialing function must be available on the mobile phone. Refer to
your mobile phone manual for further instruction.
SRL2
23