Reversing The Door - Hisense RB372N4CC2 Livret D'instructions

Reversing the door

Thin-blade
8mm socket wrench
screwdriver
Cross-shaped
Monkey wrench
screwdriver
Door stopper-left
,
are not shown in the picture below, please
ignore the relevant description.
2.Remove part①, then take down
part② from the top right side of
refrigerator. Unscrew screws③ by a
8mm socket driver or a spanner, and
remove hinge④. Please hold upper
door by hand when installing. Use a
putty knife or thin-blade screwdriver
to lever part⑤ which is at the top left
corner of the refrigerator.
Putty knife
8mm wrench
3. Remove the upper door from the
middle hinge by carefully lifting the
door straight up. Then place the
upper door on a smooth surface with
its upper cover upwards.
if some parts
4.Loose screw ③ and take down
part ② and part ①, Install
replacement door stopper-left ④
(provided in the plastic bag) and
part ②(stop block) to the left side
with screw③. Keep part ① with the
appliance for future reference.
⑤
①Self-tapping screw
②Upper hinge cover
③Special flange screw
④Upper hinge
⑤Screw hole cover-left
10
①
②
③
④