CAME BPT TH/PLUS Manuel De L'utilisateur page 26

Living room
E
Properties
Living room
F
Living room (Id:070014057901)
Lower temperature threshold
Higher temperature threshold
Properties
Living room
Lower humidity threshold
A
Lower temperature threshold
Properties
B
The programming options are:
This section is for accurately configuring the properties of
each of the devices that is managing the thermal zone. It also
allows you to access a series of graphs for monitoring the
Historical data
zone's thermal performances.
☞
on certain types of devices.
Properties
Changing the thermal zone's name
By pressing area
1
signed to zone when installed.
2
Setting temperature and humidity thresholds.
3
By pressing areas
est temperature thresholds, which, if exceeded, triggers the
system to log an alert. Alerts are viewable on the events list.
Use the buttons to set the threshold values.
Do the same for the humidity settings.
Save the settings by pressing the button
choices via the pop-up window that appears.
☞
only if, this function was enabled during installation, and if
the thermal zone is fitted with a humidity meter.
Configuring the thermal zone,
Activating the Jolly mode,
Activating the Manual mode,
Activating the Automatic mode,
Disabling a zone's thermal control.
Configuring the thermal zone
Some of the properties here below are only available
you can change the name that was as-
1
and
2 3
The temperature and humidity thresholds can be set
you can set lowest and high-
and confirm your