Cleaning And Maintenance - Redmond RK-M124-E Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
continue. When removing the kettle from the base, always turn it off by putting the switch
to the upper position.
8. At the end of operation, unplug the appliance from the outlet.
Safety system
• The kettle is equipped with an automatic shut-off system after boiling water.
• If there is no water in the electric kettle or not enough of it, the automatic
overheating protection will operate and turn off the kettle power. Wait for the
appliance to cool down, and it will be ready for use.
III. CLEANING AND MAINTENANCE
Regularly clean the kettle housing and wipe the base with a damp cloth. Let the kettle
and kettle base dry thoroughly before use.
CAUTION! Before cleaning the kettle or the kettle base unplug the appliance, drain
water and let the unit cool down.
DO NOT immerse the base of the appliance in water or keep in running water!
DO NOT use coarse tissues or sponges, abrasive pastes for cleaning. It is also not
recommended to use any chemically aggressive or other substances, not recommend-
ed for use with items which contact with food.
Descaling
While in operation scale deposits may form on both the heating element and the
housing inner walls of the appliance depending on water type being used. Use special
nonabrasive cleaning substances for kitchen utensils and appliances.
1. Let the kettle cool down before cleaning.
2. Follow the product cleaning and application instructions.
3. Thoroughly wash the kettle with water after cleaning.
4. Wipe the appliance with a damp cloth.
CAUTION! Before use ensure that electric contacts of the appliance are dry.
Transportation and Storage
Before repeated operation or storage completely dry all parts of the appliance. Store
the assembled appliance in a dry, ventilated place away from heating appliances and
direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.
IV. BEFORE CONTACTING SERVICE CENTRE
Problem
Possible cause
Kettle does not switch
on (inner illumination
No electric power supply
is off)
There is scale on the heating
Early switch-off
element
There is no water in the kettle,
Kettle switches off in
boil-dry protection system has
a few seconds
gone off
In case you didn't manage to eliminate the defects, please, refer to the authorized
service centre.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the
applicable collection point for the recycling of electrical and electronic
equipment. Do not throw away the electronic waste to help protect the
environment.
Old appliances must not be disposed with other household waste but must be col-
lected separately. Municipal disposal of recyclable wastes is free of charge. The owners
of old appliances are required to bring it to a waste facility centre. With this little extra
effort, you can help to ensure that valuable raw materials are recycled and pollutants
are treated as appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU — concerning
used electrical and electronic appliances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recycling of used appli-
ances as applicable throughout the EU.
RK-M124-E
GBR
FRA
DEU
LTU
LVA
EST
Solution
SVK
Connect the appliance to a prop-
CZE
erly working electric socket
POL
Descale the heating element (see
RUS

"Cleaning and Maintenance")

UKR
Unplug the appliance, let it cool
down. Fill the kettle up above
KAZ
MIN (0.5 L) mark
7

Publicité

Table des Matières
loading

Table des Matières