Important Safeguards - Redmond RK-M124-E Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Carefully read all instructions before operating the appliance and save them for future
reference. By carefully following these instructions you can considerably prolong the
service life of your appliance.
The safety measures and instructions contained in this manual do not cover all possible
situations that may arise during the operation of the appliance. When operating the
device the user should be guided by common sense, be cautious and attentive.

IMPORTANT SAFEGUARDS

• The manufacturer shall not be responsible for any
failures arising from the use of this product in a
manner inconsistent with the technical or safety
standards.
• This appliance is intended to be used for non-
industrial use in house hold and similar spheres
of application. Industrial application or any
other misuse will be regarded as violation of
proper service conditions. Should this happen,
manufacturer is not responsible for possible
consequences.
• Before plugging in the appliance ensure that the
circuit voltage matches operating voltage of the
appliance (see technical specifications or manu-
facturer' s plate on the appliance).
4
• Use an extension cord designed for the power con-
sumption of the appliance as the parameter mis-
match may result in a short circuit or fire outbreak.
• Use only earthed electric sockets as this is an ob-
ligatory safety requirement. Use an earthed exten-
sion cord as well.
• Unplug the appliance after use, while cleaning or
moving. Remove the power cord with dry hands
holding it by the plug, not cord.
CAUTION! Appliance runs hot while operating.
Do not touch the housing while the kettle is
operating. Do not lean over the appliance
when the lid is on to avoid scalds.
• Use the appliance for its intended purpose only.
Otherwise it will be considered as misuse.
• Kettle may be used only with a specially designed
base (included).
• Do not place the cord in doorframes or by heat
sources. Do not twist or bend the power cord, en-
sure that it is not in contact with sharp objects,
corners and edges of furniture.

Publicité

Table des Matières
loading

Table des Matières