Step 3: Attach Cables And Cords - Lexmark X4500 Guide De Setup

Step 3: Attach cables and cords

CAUTION!
supply line cord into an outlet at this
time.
Power supply
Power
supply line
Ethernet cable
cord
Warning!
the Ethernet cable when the scanner is
turned on.
Attach cables and cords
Do not plug the power
Ethernet port 2
Telephone fax line cable
Never connect or disconnect
1
Make sure the printer and scanner
are turned off and unplugged.
2
Connect the end of the Ethernet
cable with the toroid to Ethernet
port 1 on the scanner. Connect
the other end to the printer.
3
Connect the telephone fax line
cable to the scanner and then to a
phone jack using a telephone line
adapter, if necessary.
4
Connect standard cabling
compatible with your network to
Ethernet port 2 on the scanner,
and then to a network connection.
This cable is not provided by
Lexmark.
5
Connect the power supply to the
scanner.
6
Connect the power supply line
cord to the power supply, but do
not plug the other end into an
electrical outlet at this time.
5