Using The Features Menu - Sony WIDE KP-44PS2 Mode D'emploi

Menu System

Using the Features Menu

Using the Features menu you can:
a) Select if you want to listen to the sound from the set directly or through an external amplifier.
b) Adjust automatically the size of picture.
c) Select a time period after which the set switches itself into standby mode.
d) Lock the buttons on the set. In this way, the set only works by using the remote control buttons.
e) Select the source to be output from the Scart connector :2/q2 (SMARTLINK). In this way you can record from this scart
connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.
VIDEO TV
1 2 3
4 5 6
7 8 9
0
PROGR
MENU
RM 903
S
14
Menu System
1
Press the MENU button on the remote control to display the menu
on the screen.
2
Push the joystick $ to select the
the Features menu.
3
Push the joystick $ or 4 to select the desired menu item, then
push z to enter (see the table below for the effect of each menu item).
4
Push $ or 4 to select the desired setting and press the OK button
to store.
5
Press the MENU button to exit and return to the normal TV screen.
Features Effect / Operation
Speaker $ Main (sound from the set)
4 Centre In (sound from external amplifier)
Auto Format $ Off: Size of picture is not automatically adjusted.
(only for aerial 4 On: Size of picture is automatically adjusted
signal) according to the broadcaster information.
Format Correction $ Off: 4:3/14:9 is selected.
(only if Auto Format
is set to "Normal" 4 On: Smart mode is selected automatically for
or "Full") 4:3/14:9 broadcast.
Sleep Timer 4 Off
10 min.
20 min.
...
$ 90 min.
• One minute before the set switches into standby
mode, the time remaining is displayed on the
screen automatically.
• When watching the TV, press the
the remote control to display the time remaining.
• To return to normal operation from standby
mode, press the TV
control.
Parental lock $ Off (Normal mode)
4 On
AV2 Output $ TV
AV1 (audio/video signal from the Scart
AV2 (audio/video signal from the Scart
AV3 (audio/video signal from the Scart
4 AV4 (audio/video signal from the connector ... 4
If you have connected a decoder, please remember
to change back the AV2 Output to "TV" for correct
unscrambling.
symbol, then push z to enter to
button on the remote
(The set can only be switched on using the
remote control, the buttons on the TV do not
work)
(audio/video signal from the aerial)
connector :1/ ).
connector :2/q2 (SMARTLINK).
connector :3/q3).
placed in the front of the set).
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise Detection
Digital Mode
Colour Tone
Select:
Features
Speaker
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV2 Output
Select:
Speaker
Auto Format
Format Correction
Sleep Timer
button on
Parental Lock
AV2 Output
Personal
On
On
DRC 50
Normal
Enter Menu:
Main
Off
On
Off
Off
TV
Enter:
Main
Centre In
Off
On
Off
On
10 min
Off
On
TV
AV1
AV2
AV3
AV4