Environmental Protection - Benman 160 GEN Notice Originale

ARC GENERATION
5
After opening the gas supply using the
tap on the torch grip, regulate its flow
via the tap on the gas cylinder (app. 6
litres per min.).
6
Place the ceramic tip of the torch onto
the workpiece (Fig. 7, Step 1).
7
Using a circular movement, place the
tungsten electrode on the workpiece
too (Fig. 7, Step 2).
To generate the arc, move the electrode
a few millimetres away (Fig. 7, Step 3).
During the entire welding process main-
tain the same distance from the welding
pool that has been created.
Taking the torch away from the work-
piece will in-terrupt the welding process.
The pressure reducer and the welding
torch are not provided with the unit but
can be purchased separately.

ENVIRONMENTAL PROTECTION

Information on the disposal of electric
and electronic equipment in compliance
with directive 2002/96 CE (RAEE).
Warning: do not use the normal house
trash bin to dispose of this product.
Used electric and electronic equipment
must be handled separately and in
compliance with the regulations relating
to the treatment, recovery and recycling
of the said products.
In accordance with the regulations
applied in the member States, private
users resident in the EU can take used
electric and electronic equipment free
of charge to designated collection
centers.
If you experience difficulties in locating
an authorized disposal center, consult
the dealer from whom you purchased
the product.
The national regulations provide sanc-
tions against whoever unlawfully dispos-
es of or abandons waste of electric or
electronic equipment.
17