Table Of Loose Parts - Bosch 4100 Consignes De Fonctionnement/Sécurité

Unpacking and Checking
Contents
To avoid injury from unexpected starting or
!
WARNING
electrical shock during unpacking and setting up,
do not plug the power cord into a source of power. This cord must
remain unplugged whenever you are working on the table saw.
Model 4100 Table Saw is shipped complete in one carton.
Separate all parts from packing materials and check each one with
the illustration and the list of Loose Parts to make certain all items
are accounted for before discarding any packing material (Fig. 3).
If any parts are missing, do not attempt to
!
WARNING
assemble the table saw, plug in the power cord or
turn the switch on until the missing parts are obtained and are
installed correctly.

Table of Loose Parts

ITEM DESCRIPTION
1 Table Saw Assembly
2 Rip Fence
3 Table Insert
4 Barrier Guard Assembly
5 Anti-Kickback Device
6 Miter Gauge
7 Push Stick
NOTE: Remove styrofoam block 8 (for shipping purpose only)
located between the table and motor (Fig. 4). You may cause
damage to the blade elevation system if trying to raise blade if
styrofoam is not removed.
FIG. 3
5
6
QTY.
1
1
1
1
1
FIG. 4
1
1
24.
4
7
3
8
2
1