Installing The Batteries; Keys & Functions - Philips SBCRU631 Mode D'emploi

XP SBC RU 631/00 2002
You just made a great choice by buying this Philips universal
remote control! It takes the place of as many as four separate
remote controls and can operate the most-used functions of
almost any brand of TV, VCR and satellite tuner/
cable decoder.

Installing the batteries

Your SBC RU631 needs two 1.5V batteries, type R03, UM4 or
AAA.
Put them in like this:
• Remember to replace the batteries at least once a year.
• Don't leave the batteries out for longer than one hour,
• While the remote control is actively being moved about,
KEYS & FUNCTIONS
Power:
VCR
Mode Selector:
TV SAT
Mute:
PROG
+
Channel Up/Down:
PROG
VOL VOL
Volume Up/Down:
+
-
9
1 Number Keys:
To switch between one and two-digit channel selection and
display.
P P
To switch to the last selected channel.
2
15-10-2001 12:35
Instructions for use
T i p
otherwise you will need to set-up the SBC RU631 again.
the back-lighting stays on. This consumes more power
than normal and may require you to change your batteries
more frequently. You can easily turn the back-lighting
function off to conserve power. To do this please follow
the instructions in the backlighting section.
to switch TV/VCR/SAT on and off.
to select TV, VCR, or Satellite mode.
to switch the TV sound on and off.
to select next / previous channel.
to control the TV volume.
for direct channel selection and other
functions.
Pagina 2