Operating instructions
Solar power bank 8000 SL-80
Item no. 1661734
Intended use
The product is intended for use as a mobile spare battery and is suitable for charging the
rechargeable battery of mobile devices (e.g. tablet PC, smartphone, MP3 player, digital
camera, etc.). The internal, integrated battery is charged via USB or via the solar panel. The
product has a charge level indicator and an LED light. The product is shock-proof.
For safety and approval purposes, you must not rebuild and/or modify this product. Using
the product for purposes other than those described above may damage the components. In
addition, improper use can cause hazards such as a short circuit, fire or electric shock. Read
the instructions carefully and store them in a safe place. Only make this product available to
third parties together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Solar power bank
• USB cable
• Carabiner
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety information
Read the operating instructions and safety information carefully. If you do not
follow the safety information and information on proper handling in these
operating instruction, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, flammable gases, vapours and
solvents.
• The product is only protected against splash water (IP54) if all the covers are
correctly closed.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• Never leave the product unattended during use.
• The housing warms up during use. Ensure that there is sufficient ventilation. Do
not cover the housing!
• Make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Store the product at a cool, dry location when it is not in use.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Battery
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery might cause an explosion or a fire! Unlike conventional batteries (e.g.
AA or AAA batteries), the casing of the LiPo rechargeable battery is made of a
sensitive plastic film.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The
product may become warm when the battery is charging.
Product overview
1
8
7
1 Eyelet for carabiner hook
2 LED light
3 USB output (max. 2.1 A)
4 Battery level indicator
2
3
4
5
6
5 On/off switch
6 USB output (max. 1 A)
7 Solar panel
8 Micro-USB input