Air Filter Cleaning; Cleaning And Storage; Environmental Policy; Customer Service - VITO PRO-POWER VICO25A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Air filter cleaning

The air filter is a protective component in the air intake.
It prevents the suction of dust, dirt and elements that
impair the proper operation of the compressor. It must
be cleaned regularly. A clogged air filter reduces
considerably the production of compressed air.
1. Loosen the wing screw and remove the air filter cap;
2. Remove the filtering element and clean it
completely;
3. Place the filter element and fit the remaining
components in reverse order to disassemble;
The use of the air filter does not ensure the
quality of the air provided by the compressor. This
air is unsuitable for humans to breathe.

Cleaning and storage

Cleaning
After each use clean all compressor components. Wipe
the power tool with a clean, damp cloth or blow it with
low pressure compressed air. Careful handling protects
the power tool and extends its service life.
Keep the compressor and its ventilation slots clean.
Clean ventilation slots regularly or whenever they
become clogged.
Storage
To prevent unintentional start-up, unplug the power
cord, empty the air receiver tank and remove all
compressed air tools connected to the compressor.
When not in use, store the air compressor in a dry, clean
place, free of corrosive smoke and out of children's
reach.
42

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
Waste such as old oil, lubricant, filters and worn-out
parts can harm humans, animals and the environment
and as such must be properly disposed of or recycled.
Before changing the oil, find a suitable place to dispose
of the used oil. Do not throw it in the dustbin, dump it
in water courses or leave it on the ground.
You can get information about the disposal of the used
compressor from the legal responsible for recycling in
your town.

CUSTOMER SERVICE

Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt

Publicité

Table des Matières
loading

Table des Matières