Kenwood KMC030 Serie Instructions page 8

to use the countdown timer
1 Connect the mixer to the power supply. The display will show 88:88 and
then clear leaving the power on indicator visible
2 Press either the + or – button for one second and the power on indicator
will disappear and 00:00 will appear in the display.
3 Press the + and – buttons until the desired time is displayed. The timer will
count up in 5 second intervals. If the buttons are pressed continuously the
numbers will change more quickly the longer they are held down. A
maximum time of 60 minutes can be set. If a time is not selected within 30
seconds the display will revert to showing the power on indicator.
4 Press the start/stop button
down in one second intervals.
The mixer operation can be paused at any time by pressing the start/stop
G
button once, this will also pause the timer. To resume the mixing operation
press the start/stop button again, the mixer will start and the timer will
continue to count down. If the mixer is left in the pause mode for ten
minutes the timer will automatically re-set and an audible tone will be
emitted for 2 seconds.
5 The mixing process will automatically stop when the total time has elapsed
and an audible beep will be emitted for 5 seconds. The display will flash
00:00 for 5 seconds and then clear showing the power on indicator
to re set the timer
1 Zero the timer by pressing the – and + buttons at the same time.
However, if the mixer is not used for 30 minutes the display will
automatically reset to 00:00.
maximum capacities
shortcrust pastry
G
stiff yeast dough
G
G
soft yeast dough
G
G
fruit cake mix
G
egg whites
G
G
G
G
G
points for bread making
G
G
G
mixer
to start the mixer and the timer will count
.
min sec
min sec
.
min sec
min sec