Kenwood KMC030 Serie Instructions page 7

mixer
the mixing tools and some of their uses
G
G
G
to use your mixer
Turn the head-lift lever clockwise
1
Ensure the bowl seating pad is correctly fitted with the
uppermost.
G
Connect the mixer to the power supply. The display will show 88:88 and
5
then clear leaving the power on indicator illuminated
Turn the speed switch to the desired setting and then press the start/stop
6
button to start the mixer. The timer will count up in 1 second intervals.
The speed can be changed at any time whilst the mixer is operating.
Stop the mixer by pressing the start/stop button
7
be displayed and if the machine is re started the timer will continue counting
providing no longer than 3 minutes has elapsed. If the mixer is not used
within this time the display will re set to 00:00.
Important - If at any time, the mixer head is raised during an operation,
the mixer will automatically stop and it will not re start when the mixer head is
lowered. It will only restart when the head is lowered and the start/stop
button is pressed.
pulse position
To select pulse turn the speed switch anti clockwise to the
mixer will run at maximum speed for as long as the switch is held in this
position. When the switch is released it will return to the 'min' position and
the mixer will stop.
Note: If the mixer is running in the timer mode the pulse function will not
operate.
fold button
Press and release the fold button
on minimum speed for 2-3 seconds. The button can be held down for a
longer operation or pressed repeatedly as needed to combine ingredients.
Note: If the mixer is running in the timer mode the fold function will not
operate.
speed switch
creaming fat and sugar
G
beating eggs into creamed mixtures
G
folding in flour, fruit etc
G
all in one cakes
G
rubbing fat into flour
G
G
G
important
Ensure that no bowl tool is fitted or stored in the bowl when using other
outlets.
and raise the mixer head till it locks.
symbol
.
. The operating time will
min sec
position. The
min sec
and the mixer will automatically operate
min sec
min sec
min sec