Wartung; Reinigung; Entsorgung; Basic Remarks - WERMA Signaltechnik Ex-Signalhupe 750 Mode D'emploi

8

Wartung

9

Reinigung

10

Entsorgung

1

Basic Remarks

GB
1.1 Purpose of the document
1.2 Safety symbols
2

Function

3

Conformity

4

Safety instructions

Das Gerät ist wartungsfrei.
• Reinigung nur mit einem feuchten Tuch, dazu Wasser oder milde, nicht
scheuernde, nicht kratzende Reinigungsmittel verwenden. Niemals aggres-
sive Reinigungsmittel oder Lösungsmittel verwenden.
Bei der Entsorgung sind die nationalen Abfallbeseitigungsvorschriften zu
beachten!
This operating manual is necessary for the safe and appropriate use of the
appliance, and as such must be read carefully by assembly and mainte-
nance staff before commissioning, and observed in all respects. This manual
must be kept read to hand in an easily accessible place.
This symbol indicates a possibly dangerous situation.
The disregard of indicated hazards can result in serious harm to health or lead
to material damage.
The appliance was developed as a signalling device for warning, calling and
announcing in hazardous areas of group II category 2G. The protective cate-
gory EEx m II T5 permits use of this signalling device in almost all potentially
explosive atmospheres of zones 1 and 2. The explosion protection is achieved
via "m" type encapsulation.
The appliance meets the following standards and directives:
• Directive 94/9/EG (ATEX), directive 2004/108/EG (EMC)
• IEC/EN 60079-0, IEC/EN 60079-18, IEC/EN 60947-5-1
• The appliance is exclusively intended for the designated use described in
article 2 "Function". Other applications are prohibited, as inappropriate
use can result in dangerous situations.
• National safety and accident regulations must be observed.
• In case of equipment failure, additional safety precautions should be taken
to avoid possible danger to persons.
Wartung
5