Publicité
Les langues disponibles
Les langues disponibles
5. Hand tighten a 5/8" garden hose to the vacuum head.
6. Slip the hose into the hose clip.
5/8" hose
Hose Clip
8. Turn on the water supply, it will create a venturi action at
the vacuum head to collect the debris inside the vacuum bag.
10. When done or the bag is full:
(1) Slowly move the vacuum head to the side wall of the pool, turn the vacuum head up-side-down, shut off the water and lift the vacuum head out of the pool.
(2) Remove the vacuum bag and discard all the debris, flip the bag in-side-out and rinse with running water.
11. Repeat the vacuuming process until the pool is thoroughly cleaned.
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
7. Place the vacuum under water.
9. Slowly push the vacuum head across the pool floor to remove the debris.
3
Publicité
