D-Link DSL-564T Mode D'emploi page 2

Connecting the Router to Your Computer
A. First, connect the power adapter to the receptor at the back panel of the
DSL-564T and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable into any Ethernet port on the back panel of the
DSL-564T and the other end of the cable to an Ethernet Adapter or available Ethernet
port on your computer.
C. Insert one end of the Telephone cable into the ADSL port on the rear panel of the
Router and insert the other end into the wall socket. If you need to install a low pass filter,
follow the instructions of your ISP.
ADSL port -
connect to
ADSL line
Power input -
connect to power
adapter
2
Ethernet ports -
connect to
Ethernet cable
Factory
Reset
button