Hantech A020BA Serie Mode D'emploi page 7

1: When the machine is powered on for the first time, the buzzer will play power-on
music, and then the machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case of power
on, press the key to turn off the machine; in the case of power off, press the key to turn
on the machine.
3: Mode Selection Key: In the case of power on, press the key to switch between
cooling → fan → dehumidifying mode.
4: Up Key and Down Key: press the two keys to change the setting temperature or
setting time, operate as follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5:Wind Speed Selection Key:
1）In cooling and fan mode, press the key to select high,low wind speed operation.
But limited by
anti-cold conditions, under certain conditions, it may not run according to the set wind
speed.
2）In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose
low wind speed operation.
6: Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press
the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by
one hour.
7: Sleep Mode: