Addendum - Hantech A020BA Serie Mode D'emploi

Displays
'E1'.
Displays
'E2'
Note: If problems not listed in the table occur or recommended solutions do not work, please
contact the professional service organization.
X.Addendum
Schematic diagram for air conditioning
（The specific technical parameters of the machine shall be subject to the
nameplate on the product）
Compres
Treatment: Don't put the abandoned machine with other unsorted waste
together. Such waste shall be placed separately for other special use.
The remote control is not
aligned
with the direction of the
remote control receiver.
Batteries are dead.
The room temperature
sensor is abnormal.
The pipe temperature
sensor is abnormal.
Conden
receiver.
Replace batteries.
Check the room temperature sensor
and related circuitry.
Check the pipe temperature sensor
and related circuitry.
Capillar
Evapora