Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
Q&A
Q: I see there are
more than 4 screw holes
screws,
are some
missing?
Nothing is
missing; you will only need to attach the EVGA power supply to the case with 4 screws.
A:
The power supply offers more than (4) holes to
Q: My EVGA Power Supply includes (2)
only require (1) 4+4 or 8-Pin EPS
A: Motherboards
connection on the motherboard may be available for
motherboard support dual 4+4pin EPS connections, please refer to your
details on the proper function and power if the EPS connections.
Q: What is the
ECO Thermal Control
ECO Thermal Control
A: The
during low to moderate operation loads. The EVGA power supply's fan will
needed, based on the temperature the power supply reaches. The fan will also increase in RPM when needed,
based on the load operation being requested from the components connected. This prevents unnecessary
rotation,
reduces ambient noise
not required.
Please Note:
If the
ECO Thermal Control
increase in RPM as needed automatically, based on the power draw from attached components
Q: What if I want to use
A: EVGA always recommends the use of
card(s), motherboard connections and other auxiliary power connections for optimal power distribution.
Q: Does it matter
which end of the cable
A: Yes, the connections going to the power supply, will not have "break downs" like the EPS (CPU) has 4+4 on
one side and full 8-Pin on the other. Another example is the 24-Pin cable, you can see on the PSU side it is a
total of 28 Pins, where the 24-Pin connection will go to the motherboard directly.
appropriately to match the power supply side and connect only the same
supply as referenced on each connector.
Q: I plugged everything in and the system will not POST, or goes into a boot loop.
A: Power the PSU off and double check to make sure all the power connections are firmly seated on the
motherboard and on the PSU side. If the problem persists you will want to try testing the 24-Pin using the
provided PSU tester. If the PSU tests ok, then you will want to try testing the motherboard in "barebones" to get
a POST, removing everything except for the CPU and heatsink, 1 stick of RAM, 24-Pin and 8-Pin power connections.
Q: If I have an issue or a question, can I get support?
A: ALL EVGA products are backed by top tier warranties as well as technical support. Support can be reached for
your power supply at:
- USA:
+1-888-881-3842
- Europe:
+49 89 189 049 11
on the back of the power supply, but the packaging only offers (4)
EPS cables
System?
System, when enabled, allows the fan on your EVGA power supply to
levels and will
is disabled the fan will always spin, even at low loads. The fan will also
power adapters
for my video card(s)/motherboard/peripherals?
direct power connections
I plug into the power supply?
option 1, option 3. or contact us via email at support@evga.com.
or by email via eu.evga.com/support.
1600W GOLD Power Supply User Manual
provide optimal compatibility
for my motherboard, do I need to connect up both?
connection. On some models, an additional 4+4-Pin or 8-Pin
dual CPU
configurations or for
increase the life span
from the power supply to power the video
5
for today's varied case designs.
extreme over
motherboard manufacturer's manual
automatically turn back
of the fan due to the fan not spinning when
Check each cable
"matching"
cable directly to the power
clocking. If your
for
shut off
on when
as it is labeled
English

Publicité

loading