06. OPERATION
Digital speed control and display
LED display
Time
1. Use the on/off switch
0
„
" and the time indicator „
2. Turn the speed control once in a clockwise direction. The display reads
00
and
:
time indicator is activated. From speed level
symbol
will no longer be displayed. You can use the flat beater
whisk
up to speed level
NOTES:
When removing the cap
●
●
tachment symbols
not run any faster than at speed level
Keep in mind that the appliance will stop (speed level
●
●
been removed.
The drive shaft
●
●
attachments, the meat grinder or the vegetable slicer/grater. In these cases,
the dough hook, the flat beater or the whisk must be removed.
3. With every clockwise rotation of the speed control, you will increase the
speed by 1 level (0–8); one counter-clockwise rotation will decrease the
speed by 1 level (8–0).
4. When turning the speed control clockwise and holding it for 3 seconds
while the appliance is running (irrespective of the current speed setting),
the time will no longer be displayed. The timer keeps running in the back-
ground. The speed will not change.
00
4
to turn on the appliance; the speed indicator reads
00
00
:
00
, the appliance starts at the lowest speed level and the
8
.
1
for the accessories coupler, the three mixer at-
will no longer be displayed and the appliance will
9
continues rotating when using the pasta roller, the pasta
0
00
:
".
4
upwards, the dough beater
3
.
0–8
Speed level
Mixer attachment
recommendation
and the
0
) once the cap has
GB
1
,
31