Lenze E94AYAE Instructions De Montage page 19

Displays
Pos. Colour
MS
Green
(Module State)
EN
Yellow
(Enable)
ME
Red
(Module Error)
AS
Yellow
(Acknowledge
Stop)
BE
Red
(Bus Error)
DE
Red
(Drive Error)
Blinking: on/off every 0.5 s
EDK94AYAE DE/EN/FR/ES/IT 3.1
State Description
On
Drive−based safety has initialised without a fault.
Drive−based safety has initialised without a fault.
Internal communication to the standard device is not
Blinking
possible.
Drive−based safety is in service status.
Flashing
For exiting, parameterise the drive−based safety.
Drive−based safety is not initialised.
Off
Acknowledgement is not possible.
On Controller enabled
Off Non−safe display "STO"
On System error
Blinking Trouble
Flashing Warning
Off Error−free operation
Request of an acknowledgement for the restart or the
On
parameter set adoption
Blinking
SS1/STO active
Flashing SS2/SOS active
Off No stop function active
Safety bus error:
l
Communication is not possible.
On
l
Acknowledgement is possible.
Blinking Safety bus error: no valid configuration.
Off Safety bus: error−free operation.
Drive−based safety is not accepted by the standard
device (see notes in the instructions for the standard
On
device).
Drive−based safety is correctly recognised by the
Off
standard device.
Flashing: on/off every 0.1/0.9 s
l
19