Important Electrical Information; General Description - WAGNER FURNO 500 Guide D'utilisation

Important Safety Information • Read all safety information
before operating the equipment. Save theSe InStRuctIonS

Important electrical Information

Use only an extension cord that will accept the plug on the product. Make sure your extension
cord is in good condition. When using an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. A SJT type cord is required. Cord shall be 14 AWG
minimum for general indoor use.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way. When servicing, only use identical service parts. Contact WAGNER
for a replacement cordset.

General description

This heat gun is a quality power tool. Like any power tool, it can be dangerous when misused.
Read the following instructions carefully and follow all safety precautions. It is the responsibility
of the owner to use the heat gun properly. Only adults should use a heat gun.
Specifications
Housing: .................Engineered high-impact corrosion and heat-resistant polymers
Wattage: ................1500 Watts on highest, 150 Watts on lowest.
Heat Output: ........Approximately 1200°F on high, approximately 150°F on low
Weight: ...................1.95 pounds
For more details on multiple projects and 'how to' videos
please visit www.wagnerspraytech.com.
Save theSe InStRuctIonS
5
EN