WAGNER FURNO 500 Guide D'utilisation page 6

Using the Heat Gun
always read the safety information included in this
manual before using the heat gun.
Component description (Fig. 1)
1) Graphic LED screen and control
panel
2) Hanging hook
3) Cordset with integrated stabilizers
4) Rear stabilizer fins (stand)
5) Side bars to prevent nozzle touching
surface
6) Heat shield
attaching the power cord (Fig. 2)
The power cord (Fig. 2, 1) for the heat gun is
delivered detached from the gun (Fig. 2, 2).
To attach, line up the cord by the forward
facing groove with the socket on the handle
of the gun and press together until you hear
a click.
Hands-free operation (Fig. 3)
The heat gun has an integrated stand for
bench top applications and cool down
mode.
6
EN
1
1
6
5
2
2
2
1
3
4
3