Cleaning And Maintenance; Storage; Environmental Protection; Important Note Regarding Product Liability - WAGNER FURNO F100 Traduction Du Mode D'emploi Original

Table des Matières

Les langues disponibles

Furno F100

10. Cleaning and Maintenance

Keep the intake openings on the housing clean and free of obstructions. Use a soft,

dry brush to clean the openings periodically. Use only mild soap and a damp cloth to

clean the Heat Gun. Many household cleaners contain chemicals which could seriously

damage the housing.

Do not use petroleum, turpentine, lacquer or paint thinner, dry cleaning fluids or similar

products when cleaning the Heat Gun.

NEVER allow any liquid to get inside the tool or immerse any part of the tool into a

liquid. Cleaning and user maintenance shall not be made by children.

The nozzle will turn dark over time because of the high heat. This is normal

and will not affect the performance or life of the unit.

Only store the heat gun once it has completely cooled down.

The device and all accessories and packaging have to be recycled in an

environmentally friendly manner. Do not dispose of the appliance with

household waste. Support environmental protection by taking the appliance

to a local collection point or obtain information from a specialist retailer.

According to an EU directive, the manufacturer is only liable without limitation for faults

in the product if all parts come from the manufacturer or have been approved by the

manufacturer and have been mounted to the device and are operated properly. If third-

party accessories or spare parts are used, the manufacturer is exonerated wholly or partly

from his/her liability if use of the third-party accessories or spare parts have caused a

defect in the product.

Table des Matières

Table des Matières