WAGNER FURNO 500 Guide D'utilisation page 7

Touch Pad Control Panel
The heat gun gives you a wide temperature range to choose from, depending upon the type of
project. These can be controlled via the Touch Pad Control Panel.
description
1) Power button: Turns the heat gun ON
and OFF or switches the heat tool into
cool down mode
2) Mode selector: Sets the temperature
range and air flow speed you are using
3) Mode indicator: Low air flow / low
temperature range (See Fig. 5, a)
4) Mode indicator: High air flow / high
temperature range (See Fig. 5, b)
5) Mode indicator: Cool down
6) Temperature indicator: Shows the
current heat output setting (see Fig. 5)
7) Temperature selector: Increases the
temperature (+)
8) Temperature selector: Decreases the
temperature (-)
Temperature Guide Led display
description
Air flow mode: Low
Temperature range: 150
Cycle temperatures: See Fig. 4, #7 & #8
= Illuminated
= not illuminated
Air flow mode: High
Temperature range: 200
Cycle temperatures: See Fig. 4, #7 & #8
= Illuminated
= not illuminated
F - 1050 F
o o
F - 1200 F
o o
4
1
5
3
8
5a
5b
2
4
6
7
7
EN