Dell Precision M90 Mode D'emploi page 21

3 If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in
the following table for more information.
Tab
Results
Errors
Help
Configuration
Parameters
4 When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities
CD, remove the CD.
5 Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the
computer, close the Main Menu screen.
Function
Displays the results of the test and any error conditions encountered.
Displays error conditions encountered, error codes, and the problem
description.
Describes the test and may indicate requirements for running the test.
Displays your hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for all devices
from the system setup program, memory, and various internal tests,
and it displays the information in the device list in the left pane of the
screen. The device list may not display the names of all the
components installed on your computer or all devices attached to your
computer.
Allows you to customize the test by changing the test settings.
Quick Reference Guide
21