End Of Life - STERWINS UP20 Notice De Montage, Utilisation Et Entretien

Problems
Unsatisfactory
cutting
performance
7.6 FATAL CIRCUMSTANCES : CRITICAL ISSUES
Problems
The machine smokes during operation

8. END OF LIFE

Electrical products should not be discarded with household products. Used electrical
products must be collected separately and disposed of at collection points provided for
this purpose. Talk with your local authorities or dealer for advice on recycling.
Probable causes
Blade is worn / damaged
Blade is rusted
Thickness of branches
exceeds capacity
The force to press the
trigger is too week
The battery pack is lack
of power
177
Solutions
Replace the blade with
a new one
Remove battery pack
then clean the blade or
replace it
Only cut branches
complying with the
capacity
Press harder to reach
full power or the power
you need
Charge the battery
pack according to the
instructions included
with your model
Solutions
Immediately stop the machine, Remove the
battery pack then speak to service center
Qualification
-
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN