Setting The Controls; Selecting A Wash Cycle - Whirlpool 900 Serie Guide D'utilisation Et D'entretien

Setting the Controls

Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. (Some cycles share the same pad.) Turn the Cycle Control Knob to the
desired cycle.
CYCLE
POTS-N-PANS
POTS-N-PANS
•
The water heats to 140°F (60°C) in
both washes.
•
The water heats to 140°F (60°C) in
the final rinse.
HEAVY
(on some models)
HEAVY
• Select Hi-Temp Wash to heat water
in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
NORMAL
NORMAL
is based on this cycle.)
•
Select Hi-Temp Wash to heat water
in the main wash.
•
The water heats to 140°F (60°C) in
the final rinse.
†
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The Cycle Control Knob does
not move while water is being heated.
Double wash for
maximum cleaning
of cooked-on or
baked-on foods.
Double wash for
cleaning heavily
soiled loads.
Double wash for
normal, everyday
soiled loads. (The
Energy Guide label
A "3 3 3 3 3 " shows what each cycle includes
MAIN
WASH RINSE WASH
3 3 3
3 3
3
3 3
FINAL
RINSE RINSE DRY
3 3 3
3
3 3
3 3 3
continued on next page
CYCLE
TIME
(Minutes)
76 †
76 †
66 †
15