Further Functions - Klarstein COLDPLAYER Mode D'emploi

Key Function
Mode Press the MODE button repeatedly when the power is on to
select one of the following modes: General, Natural, Sleep
mode. The lights above the button indicate the current mode.
General: The fan blows at a constant speed.
Natural: The fan simulates natural wind by blowing at different
speeds.
Sleep: The fan blows at different speeds. With each hour, the
wind speed is reduced by 1 level to level 1.
Up&Down Swing When on, press this button to direct the airflow up and down.
Press the button again to end the function.
Left&Right Swing When on, press this button to direct the airflow to the left and
right. Press the button again to exit the function.
Humidify/Anion When on, press this button several times to activate either the
Humidify function or the Anion function, or to exit both functions.
Note: Before using the Humidify function, first check that there
is sufficient water in the tank. As the water approaches the MIN
mark, pour more water into the tank.

FURTHER FUNCTIONS

Water level warning
If the water level in the tank is too low, the unit stops and the HUMIDIFY indicator
flashes. Top up with water and restart the function.
Auto Power Off
If the unit is switched on but no settings are made for more than 15 minutes, it
automatically switches back to standby mode.
EN
21