Button Functions - Klarstein 10034627 Manuel D'utilisation

BUTTON FUNCTIONS

ON/OFF
SPEED
MODE
SWING
COOL
TIMER
ECO
STRONG
Press this button once to make the unit ready for working.
Press this button again to turn the unit OFF.
Press this button to select the desired fan speed, the LED
light on the display will be on in turn. The numbers next
to the lights indicate the speed (1, 2, 3).
Press this button to select the desired fan mode, it
operates according to the preset program, alternating
between different fan speeds. The LED will be on with the
according mode in turn: Sleep > Natural > Normal.
The fan speed will be switched between
Sleep level 1 and 0 (Off) in cycle automatic, and
will be turned off in 8 hours.
The fan speed will be switched between
Natural
1-2-3 in cycle automatic.
Normal The fan will be switched to steady speed.
Press this button once to swing both fans from left to
right. If you press the button a second time, the upper
fan will start to swing. If you press the button a third time,
the lower fan will swing. If you press this button a fourth
time, the swing function is deactivated.
Press this button once to start the evaporative cooling
function. Press this button again to cancel. (If there is
too little water in the water tank, a beep sounds. Fill the
water tank and press the button again.)
Press this button to select the desired timer. It can be set
for 1,3,5, 8 hours. Press this button again to cancel.
Press this button once to turn off the indicator lights on
the display. Press the button again to turn the indicator
lights back on.
Press this button the fan speed will be switched to very
high speed, it can circulate the room air rapidly. This
setting will make a louder noise. Press this button again,
the fan speed will be switched to normal fan speed
again.
EN
21