Control Panel And Key Functions - Klarstein NEW BREEZE Mode D'emploi

CONTROL PANEL AND KEY FUNCTIONS

+/- In cooling mode, press these buttons to adjust the temperature in 1 °C increments. The adjustable
temperature range is between 16 °C - 30 °C. This button is inactive in auto, drying or fan mode.
MODE Press this button to select the mode in the following order: Cooling> Drying> Fan.
COOL: The cooling indicator lights up in this mode. This display shows the set temperature. The
adjustable temperature is between 16 °C and 32 °C.
DRY: The drying indicator lights up in this mode. This display shows no temperature.
FAN: On this mode only the fan works. The fan indicator lights. The display shows no temperature.
FAN Press this button to select the speed in the following order: low > medium > high > auto > low.
TIMER Press this button to call up the timer. Then press the +/- key to set the timer. Each time the button is
pressed, the time will change by 0.5 hours until 10 hours are reached. After that, the value will change
by 1 hour each time you press the button. After you have entered the desired value, wait 5 seconds until
the display automatically accepts the time. As soon as the timer starts running, the timer indicator will
light up in the display. If you want to cancel the timer, press the timer button again in timer mode.
SLEEP Press this button to activate sleep mode. If the device is currently in cooling mode, the temperature will
increase by 1 °C over the course of one hour as soon as the sleep mode starts. Over the next 2 hours,
the temperature will rise by a further 2 °C and then will stay at this level. The sleep function does not
work in fan, auto or drying mode.
EN
1 +/- Key
2 Temperature display
3 Cooling display
4 Drying indicator
5 Fan display
6 Mode
7 Timer
8 On / off button
9 Sleep mode
10 Fan
1 1 Fan speed
35